Probe overview
Product families: 50-70-299
The leaf surface probe measures wetness and temperature. Its resolution is 0.1 % for wetness and 0.1 °C for temperature.
Typical applications
- Monitor leaf wetness following rainfall, dew or sprinkler irrigation.
- Support agronomic observations and assessment of conditions conducive to foliar diseases.
- Compare growing areas in fields, orchards or greenhouses.
The reading reflects the installed sensing surface, not each individual leaf.
LoRaWAN downlink configuration
The kits supplied with their associated Modbus probe are preconfigured by default. The following downlinks can be used if reconfiguration is required.
Send each hexadecimal payload separately on FPort 125, in the order shown. Check each response before proceeding. The length byte at the start of each configuration-file line is not part of the downlink payload.
| Action | Payload |
|---|---|
| Clear existing standard and batch reports OPTIONAL | 115000500203 |
| Set 4800 bit/s | 110580060000220012C0 |
| No parity, 8 data bits, 1 stop bit | 1105800600022000 |
| Configure a two-register read on input 1 | 1105800700004106010300000002 |
| Report every 10 minutes | 1106800700000141800A800A0100 |
| Switch DISPO13 on 2.5 seconds before the read | 1105800780011A0109C4 |
| Battery and external voltage report every 60 minutes | 1106005000000641803C803C0700050000000000 |
The highlighted fields are the minimum and maximum reporting intervals: 800A = 10 minutes, 803C = 60 minutes. Equal intervals specify periodic reporting.
Example uplinks
110A80070001410701030400000101
Decoded output
{
"data": {
"samples": [
{
"variable": "temperature_1",
"value": 25.7,
"date": "2026-11-17T13:26:19.069Z",
"unit": "Cel"
},
{
"variable": "vwc_1",
"value": 0,
"date": "2026-11-17T13:26:19.069Z",
"unit": "%"
}
],
"temperature_1": 25.7,
"temperature_1_unit": "Cel",
"vwc_1": 0,
"vwc_1_unit": "%"
},
"warnings": []
}
Codec
